Coriolis Mass Flowmeter

Coriolis mass flowmeter is developed according to the principle of coriolis mass flow meter, it can be directly measure parameters such as mass flow , density and temperature. It has been widely used in petroleum, natural gas, chemical, pipeline transportation industries. Its function is for trade settlement and process control to ensure precision reflection, enhanced safety and maintenance cost save.

AMF series Coriolis meter's mass flow can yield up to 0.15% accuracy. It is incredibly accurate and excellent repetition. And allows you as producer to make consistency and repeatability of batches.

Direct mass flow. Do not lose the accuracy by measurement of T, P, Z &ρand Volume conversion.

It can measure more than one variate in the tube. Such as mass flow, volume flow, density, concentration, temperature and viscosity.

It's lower maintenance. There is no moving parts in Coriolis meter and no impellers and obstructions in the line. So, There is no movement and wearing mar. The meter's last forever.

Measure high viscosity and non- Newtonian fluid, besides homogeneous fluid, not only single phase fluid can be measured, but also homogeneous multi- phase fluid.

Good antiseptic property, various common corrosion fluids can be measured.

APPLICATIONS

• Suitable for virtually any mass flow application, such as: Batching, Dosing, General flow control, Injections, Filling
• Loading of boats, vessels, rail tank wagons
• High temperatures and other challenging applications
• Highly viscous media (low pressure drop and excellent performance at low flow conditions)
• Properly used for corrosive liquids and Low Flow 
• Properly used for beverages that require  food grade instrument

FEATURES

• The outstanding features include :  Suitable for pressure up to 450 bar
• Size : 1/4" - 12 " : 
• Measuring ranges : 0.002  kg/min to 25.000 kg/min ( depending on pipe size ) 
• Accuracy   : 0.1% and better
• Repeatability : better than 0.05%
• Optimised solutions for your batching operation
• Extra compact design with minimal space requirement
• EEx Approvals (i.e. ATEX, CSA, ...)
• Custody Transfer Approvals (i.e. PTB, NMI, ...)
• As heavy duty version available (increased wall thickness of measuring pipes for additional safety - 250 bar)

ADVANTAGES 

• No pressure effect – no deterioration of accuracy due to pressure changes by the patented Omega Shape
• Medium flow rates in combination with high operating pressure
• Patented torsion swinger design assures  most stable and drift free measurement,
• Increased signal to noise ratio by torsion swinger
• Longest life time and increased safety (low stress in welds and increased wall thickness against abrasion)
• No moving parts, practically no maintenance
• Removable connection block

Specification : 

• Typical measuring ranges : 0.002  kg/min to 25.000 kg/min
• Flow Accuracy :  0.1% and better
• Repeatability  :  better ± 0.05% of rate
• Density         :  better than  ± 0.001 g/cc
• Temperature   : -200 to +350°C 
• Pressure range : Measuring Loops max. 93 bar - max CL 600 / PN 40
• Material of Wetted Parts :
• 1.4571 / SS 316Ti (standard), 
• 1.4539 / SS 904L on request, 
• Hastelloy C22 on request
• Tantalum and Other material on request
• Housing : 
• Stainless Steel: 1.4301 / SS 304 ( standart) and  others on request
•  Protection class: IP 65 (Nema 4X) and higher on request 
• Electrical connection
• Junction box / aluminium coated (standard) IP 65 (Nema 4X) (Junction box in SS optional)
• Cable entry M25 x 1.5 (M20 x 1.5, ½" and ¾" NPT optional)
• Max cable length between RHM and RHE :
• 100 m (330 ft)
• 200 m (660 ft) only with factory approval
• Approvals
• ATEX (CESI 02 ATEX 053 X) : Ex II 1 G, EEx ia IIC T6-T1
• CSA (220705) Class I, Div 1 and 2, Groups A, B, C and D;Type 3
• Custody Transfer Approvals (PTB 1.32-97027224 and NMI TC 3382)
• PED according to directive 97/23/EC available
• 3A Sanitary Approvals
• Transmitter and Display mounting : wall mounting, Pannel Mounting, Rack Mounting
• Outputs :
• 2 analog outputs, 
• 1 frequency/pulse output 
• 3 digital outputs (Lt, +/-, error...)
•  Inputs :   2 inputs (hold, reset, zero)
• Power supply :   
• 230 VAC +/- 10% or
• 115 VAC +/- 10% or    
• 24 VDC 
• Cable entries:   4 x M25 x 1.5 - others optional
• Interface :  
• RS 422/485/232 - optional
•  HART - optional 
• Power consumption : < 15 W