Dwyer MTF Multi-tube Flow System |
- Determine the flow pattern required for the application.
- Select a 65 mm or 150 mm frame, along with the appropriate number of tubes required, flow pattern, and wetted parts. Choose a 150 mm Gas Proportioner Frame (Series MTP) to blend the 2 or 3 gases at required concentrations. Gas proportioner frames are typically used at 50 psi.
- Choose the appropriate 65 mm or 150 mm correlated flow tubes, for air or water.
- Select a valve cartridge if desired that matches the range of the flow tube.
Dwyer MTF Multi-tube Features
- Ideal for multichannel metering, mixing, or monitoring applications.
- Universal 65 mm or 150 mm scales with correlation charts.
Dwyer MTF Multi-tube Specification
Scales | Universal 65 mm or 150 mm scales with correlation charts. |
Accuracy | Accuracy: *Correlated Flow Tubes: +/- 2% FS @ 70 deg F (21.1 deg C) and 14.7 psia (1 atm absolute); Direct Reading Flow Tubes: +/- 5% FS @ 70 deg F (21.1 deg C) and 14.7 psia (1 atm absolute). *Models FT-61, FT-62, FT-123, and FT-124 have an accuracy of +/- 5% FS @ 70 deg F (21.1 deg C) and 14.7 psia (1 atm absolute). |
Repeatability | ±0.25% of scale reading. |
Turn-down Ratio | 10:1, 20:1 with combinations of two floats installed in meter. |
Maximum Operating Pressure | 200 psig (13.8 bar). |
Maximum Operating Temperature | 250°F (121°C). |
Mounting | Vertical. |
Connection | 1/8" female NPT. |
Flowtube | Borosilicate glass. |
Float | 316 stainless steel or black glass as indicated. |
Float Stops | PTFE. |
End Fittings | Anodized Aluminum or 316 stainless steel. |
Front Shield | Polycarbonate. |
Side Panels | Black, anodized aluminum. |
O-rings | Buna-N on aluminum models and Fluoroelastomer on stainless steel models. |
Download Data Sheet: Series MTF Multi-tube Flow System
Ref: dwyer-inst.com