Bamo M25 – M40 Water-Meter

Bamo M25 – M40 Water-Meter are volumetric counters, suitable for totalization of clean or slightly dirty liquids. A grid located at the inlet, protects the measuring chamber from possible introduction of particles.

Bamo M25 – M40 Water-Meter

Bamo M25 – M40 Water-Meter Features:

• Water-meter, oscillating disc
• Body in nylon
• Ranges from 0.5 to 160 l/min
• Watertight measuring chamber

Operation:

Lower and upper parts of measuring chamber are spherical in shape. Inside the chamber is the disc, which is set in motion by the liquid. The flow causes an oscillating movement of the disc, opening and closing alternately the inlet and outlet orifices of the measurement chamber. The frequency of disc oscillations is magnetically transmitted to the totalizer.

Commissioning

The water-meter must be installed on a horizontal pipe, full of liquid.

Displays and remote signals (3 possibilities):

• Totalizer: 6 reading rollers
• Emitting head (1 or 10 pulses per liter) without display
• Emitting head (1 or 10 pulses per liter) without display LCD (Reset function by REED contact - Max. 20 Hz - 24 V - 50 mA)

Accessories :

BCP 48: Counter/ down counter

Application:

These water-meters are suitable for totalization of clean or slightly dirty liquids, raw water or demineralized water.

Bamo M25 – M40 Water-Meter Specification:

Flow ranges	M25: 1 to 100 l/min
	M40: 2 to 160 l/min
Viscosity	500 cPo
Nominal pressure	PN 16
Temperature	Max. 50 °C
Accuracy	±1.5%

Download Data Sheet: Water-Meter in Plastic M 25 – M 40

Ref: bamo.eu