Flocorp MEMFlo™ MFT2 Universal 2-Wire Flow Transmitter

Flocorp MEMFlo™ MFT2 flow transmitter accurately calculates and outputs the flow rate. Compatible with any MEMFlo variable area flow meter, MFT2™ combines FLO-CORP’s time-proven variable area technology with a high tech processor and solid-state circuitry.

Flocorp MEMFlo™ MFT2 Universal 2-Wire Flow Transmitter

Each device includes an analog output that can be configured for 0-5 VDC, 0-10 VDC, or 4-20 mA current loop. Typical applications include pump flow output, compressed air consumption, cooling flow monitoring, steam flow usage/optimization and combustion gas metering.

Flocorp MEMFlo™ MFT2 Features and Benefits

• Non-contact sensor electronic
• Electronic signal conditioning circuit
• 3 output modes: 4-20mA, 0-5 VDC or 0-10 VDC
• Proportional analog output - two-wire, 4-20mA
• Designed to slip over any standard measuring tube
• Pre-calibrated from the factory for fast installation and start-up
• Optional Epoxy Coated Aluminum Enclosure for durable, rugged applications

Specifications

General
Process Temperature	F: -20º to 240º C: -29º to 116º
Ambient Temperature	F: -20º to 158º C: -29º to 70º
Environmental	Humidity: 0-90% non-condensing
Accuracy	±1% 0.25% rate
Repeatability	±0.10% rate
Electrical
Power Requirements	0.5 VDC Output 10-30 VDC @ 3 wire 0-10 VDC Output 12-30 VDC @ 3 wire 4-20 mA Output loop-powered, 12 VDC - 30 VDC - 2 wire
Power Consumption	25 mA maximum
Analog Outputs	0-5 VDC and 0-10 VDC into 10,000 Ohms minimum; 4-20 mA into 1000 Ohms maximum
Resolution	1:4000
Transmission Distance	4-20 mA limited by cable resistance (4000’) 0-5 VDC 1000 feet (330m) maximum 0-10 VDC 1000 feet (300m) maximum
Circuit Protection	Reverse polarity and current limiting
Isolation	Inherently isolated from the piping system
Transient Over-Voltages	Category 3, in accordance with IEC 64
Temperature Drift	50 ppm/ºC (Max)
Enclosure Rating	NEMA 4 (IP67) ; NEMA 7, Aluminum

Download Datasheet: MEMFlo™ Universal MFT2 2-Wire Flow Transmitter

Ref: Flo-corp.com