Flux FMO 104 Series Oval Flow Meter

Flux FMO 104 Series Flow Meter built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier. This way e.g. motor and / or magnetic valve and the most different processes can be controlled.

Flux FMO 104 Series Oval Flow Meter

The housing parts of the flow meters FMO form a measuring chamber in which the oval rotors mounted on axes can turn. The fluid flows through the measuring chamber and thus actuates the oval rotors. By the means of a Reed sensor the number of rotations is counted and forwarded as an impulse or passed on to the evaluation unit FLUXTRONIC®. This calculates the flown through quantity of the fluid based on the previously entered, medium-dependent calibrating constant.

Flux FMO 104 Series Flow Meter Features:

• Oval rotor principle
• For thin to highly viscous pure media
• Available with integrated evaluation unit FLUXTRONIC® or as impulse version for the use in piping systems
• Depending the type for use with drum pumps or eccentric worm-drive pumps
• High accuracy and repeat accuracy
• Signal can be forwarded to FLUXTRONIC® or another external control as e.g. PLC
• Can be used for ex-applications in Zone 1
• Also available with FOOD and FDA certification

Advantages:

• Very precise dosing possible
• High resistancy
• Wide range of viscosities can be covered
• Can also be used for pulsating volume flows
• Low pressure loss
• Also available in Version with FDA CFR 21

Application:

• Oils
• Gasoline
• Solvents
• Not self-lubricating media

Flux FMO 104 Series Flow Meter Specification:

• Flow rate: min. 1 l/min - max. 30 l/min
• Filling accuracy: +/- 0,5 %
• Operating pressure: max. 200 bar
• Viscosity: min. 1 mPas - max. 500.000 mPas
• Housing Materials: Stainless steel, Aluminium
• Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels
• Protection class: IP 54
• Application area: For manual or semi-automatic filling
• Repeatability: +/- 0,03 %

Download Data Sheet: Flow Meter FMO 104 Series

Ref: flux-pumps.com