AW-Lake Case Drain Flow Meter

AW-Lake Case Drain Flow Meter is a Variable Area Flow Meter offering a low-cost alternative for monitoring pump performance and identifying required maintenance without interrupting operation. This meter is available for oil or water flow measurement.

AW-Lake Case Drain Flow Meter

The superior exterior design of this flow measurement solution is weather-tight for use in outdoor environments and in systems with wash-down requirements. Case Drain Flow Meter is a low cost alternative for monitoring pump performance and identifying required maintenance.

AW-Lake Case Drain Flow Meter Features:

• Measuring Accuracy: ±5% of full scale
• Flow Measuring Range: 0.1-30 GPM (0.5-115 LPM)
• Maximum Operating Pressure: 1000 PSIG (69 Bar)
• Maximum Operating Temperature: 240°F (116°C)

Advantages:

• Unrestricted Mounting: Allows for horizontal, vertical or inverted installation and does not require straight plumbing on inlet or outlet.
• Superior Exterior Design: Weather-tight for use outdoors and/or on systems where wash-downs are required.
• Rugged and Reliable: These meters are constructed with all metal pressure vessels that allow safe and permanent installation.
• Multiple Ports Available: Standard selection of NPT, SAE and BSPP ports reduces the amount of adapters required for installation.

Specification:

• Measuring Accuracy: ±5.0% of full scale
• Repeatability: ±1% of full scale
• Flow Measuring Range: 0.1-30 GPM (0.5-115 LPM)
• Maximum Operating Pressure: 1000 PSIG (69 Bar)
• Maximum Operating Temperature: 240°F (116°C)
• Standard Calibration Fluids:
  • Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
  • Water meters: tap water @ 70°F (21°C), 1.0 sg
• Filtration Requirement: 74 micron filter or 200 mesh screen minimum
• Materials Of Construction: (Non-Wetted Components):
  • Window Tube: Polycarbonate
  • Window Seals: Buna-N
• Materials Of Construction (Non-Wetted Components):
  • Casing: Anodized Aluminum
  • End Ports: Non-Anodized Aluminum
  • Seals: Buna-N
  • Transfer Magnet: PTFE coated Alnico
  • All other internal parts: Stainless steel

Download Data Sheet: Case Drain Flow Meter

Ref: aw-lake.com